Volume 246

Entire issue: Proceedings of BSTU Issue 1 No.2 (246) - Forestry. Environmental management. Reprocessing of renewable resources

FOREST MANAGEMENT, FOREST INVENTORY AND INFORMATION SYSTEMS IN FORESTRY

Influence of thinning cuttings on the formation of clean spruce stands 5–11

UDC 630*242

V. V. Kotsan,

O. A. Sevko,

T. L. Yaronskaya

DOI : https://doi.org/10.52065/2519-402X-2021-246-1-5-11

Average increase of timber cost different species in belarus 12–17

UDC 630*562

V. P. Mashkovsky,

V. P. Zorin,

P. V. Sevruk

DOI : https://doi.org/10.52065/2519-402X-2021-246-2-12-17

Identification of specially valuable forest sites in the forest fund 18–27

UDC 630*63

S. I. Minkevich,

A. V. Abramchuk,

V. V Kotsan,

P. V. Sevruk,

N. P. Demid

DOI : https://doi.org/10.52065/2519-402X-2021-246-3-18-27

The influence of changes in the spatial structure on the growth of the second layer of spruce in a complex tree 28–35

UDC 630*232

О. А. Sevko

DOI : https://doi.org/10.52065/2519-402X-2021-246-4-28-35

FOREST ECOLOGY AND SILVICULTURE

Forest formation in former localities located on fertile soils in the chernobyl nuclear power plant exclusion zone 36–50

UDC 630*23:630*915:630*181.32

D. K. Garbaruk,

A. V. Uglyanets,

A. N. Voronetskaya

DOI : https://doi.org/10.52065/2519-402X-2021-246-5-36-50

Ways of formation of natural pine forests by renovation felling 51–57

UDC 630*232:630*221.411:630*174.754

K. V. Labokha,

A. A. Prishchepov,

A. O. Luferov

DOI : https://doi.org/10.52065/2519-402X-2021-246-6-51-57

Features of reproduction and cultivation of the pine formation of Belarus 58–65

UDC 630*161.32:630*907.3

V. G. Shatravko,

L. N. Rozhkov

DOI : https://doi.org/10.52065/2519-402X-2021-246-7-58-65

FOREST REGENERATION AND FOREST GROWING

Forestry investigation of optimal planting density of forest cultures of European spruce 66–72

UDC 630*232.4:631.543.2

V. K. Gvozdev,

A. P. Volkovich

DOI : https://doi.org/10.52065/2519-402X-2021-246-8-66-72

Changes of morphobiometric, physiological and biochemical parameters of pine seedlings(Pinus sylvestris L.) when application protective-stimulating compositions 73–80

UDC 630*443.2*414

I. A. Mashkin,

V. P. Shukanov,

E. V. Mel’nikova,

L. A. Koryt’ko,

S. N. Polyanskaya

DOI : https://doi.org/10.52065/2519-402X-2021-246-9-73-80

Qualitative characteristics of irrigation water and their influence on technological aspects of cultivation of container planting material of coniferous species 81–87

UDC 630*232.329.9

V. V. Nosnikov,

O. A. Selishcheva

DOI : https://doi.org/10.52065/2519-402X-2021-246-10-81-87

Relationship of electrical conductivity of substrate and content of main nutrients 88–92

UDC 630*114.25

V. V. Nosnikov,

А. V. Yurenya,

A. M. Granik,

O. A. Selishcheva

DOI : https://doi.org/10.52065/2519-402X-2021-246-11-88-92

Processes of hybridization in sessile and pedunculate oak by the results of molecular genetics analysis 93–102

UDC 630*165.3:630*17:582.632.2

V. E. Padutov

DOI : https://doi.org/10.52065/2519-402X-2021-246-12-93-102

Stability of natural regeneration at ravine-gylly systems 103–111

UDC 630*234

V. M. Khryk,

I. V. Kimeichuk,

V. V. Nosnikau,

S. U. Rabko,

A. U. Kozel,

V. N. Maliuga,

V. Y. Yukhnovskyi

DOI : https://doi.org/10.52065/2519-402X-2021-246-13-103-111

FOREST PROTECTION AND LANDSCAPING

State of pine stands and analysis of the incidence of pine drying in separate forestry enterprises of the Gomel Polesia in 2017–2020 112–120

UDC 630*453

D. A. Babuľ ,

A. A. Sazonov,

V. N. Kukhta,

E. A. Ukolova

DOI : https://doi.org/10.52065/2519-402X-2021-246-14-112-120

Recommendations for landscape adaptation of the architeсtural and spatial environment of general secondary education institutions for children with OPFR and the disabled 121–127

UDC 721.05:376

O. P. Evseeva,

P. V. Shumskaya

DOI : https://doi.org/10.52065/2519-402X-2021-246-15-121-127

13-year-old dynamics of the state of floodplain oak forests of the Berezina river 128–137

UDC 630*443.3:630*182.21

A. A. Sazonov

DOI : https://doi.org/10.52065/2519-402X-2021-246-16-128-137

Arthropodous phytophages – pests of robinia trees (Robinia S. L.) under conditions of Belarus 138–148

UDC 595.7(476)

V. V. Sakhvon

DOI : https://doi.org/10.52065/2519-402X-2021-246-17-138-148

Species composition of urban green spaces as factor affecting selection of nest sites by corvids 149–156

UDC 598.293

V. V. Sakhvon

DOI : https://doi.org/10.52065/2519-402X-2021-246-18-149-156

Assessment of biological efficiency of different methods clearing of cutting areas from logging residues on felling pine stands in the foci of pine stem pests 157–163

UDC 630*453

V. V. Usenya,

N. L. Sevnitskaya,

G. М. Pomaz

DOI : https://doi.org/10.52065/2519-402X-2021-246-19-157-163

Monitoring of the number of longhorn beetles of the genus Monochamus with the application of the pheromone Preparation MONVABOL in coniferous plants 164–169

UDC 630*4

V. V. Usenya,

N. S. Blinova

DOI : https://doi.org/10.52065/2519-402X-2021-246-20-164-169

TOURISM AND FOREST HUNTING

Studying a variety of criteria for aesthetic evaluation of landscapes 170–178

UDC 504.54

V. L. Andreeva

DOI : https://doi.org/10.52065/2519-402X-2021-246-21-170-178

The characteristics of Vaccinium angustifolium Ait. varieties of belarusian selection and conception of further selection improvement of species under cultivation in conditions of a developed riding peat bogs in Belarusian Poozerie179–187

UDC 634.739:631.527(476)

D. V. Gordey,

O. V. Morozov

DOI : https://doi.org/10.52065/2519-402X-2021-246-22-179-187

TIMBER PROCESSING COMPLEX. TRANSPORT AND TECHNOLOGICAL QUESTIONS

Analysis and prospects of logging technology in natural production conditions of the Republic of Belarus188–195

UDC 630*36:621.9

S. A. Golyakevich

DOI : https://doi.org/10.52065/2519-402X-2021-246-23-188-195

Perfection of technology development of difficult-cutting fund 196–201

UDC 630*614.3

A. A. Dukhovnik,

E. A. Leonov ,

S. Ye. Ariko ,

D. V. Klokov

DOI : https://doi.org/10.52065/2519-402X-2021-246-24-196-201

Using the two-stage skidding in the conditions of the Republic of Belarus 202–207

UDC 630*372

E. A. Leonov,

D. V. Klokov,

V. S. Isachenkov

DOI : https://doi.org/10.52065/2519-402X-2021-246-25-202-207

Research of the interaction process of the wheel drive with double-layer soil base 208–211

UDC 629.032

Yu. A. Kim,

M. T. Naskovets,

N. I. Zharkov,

V. I. Gil

DOI : https://doi.org/10.52065/2519-402X-2021-246-26-208-211

Analysis of the main operating conditions and dynamic loading of critical parts of the transmission of skidders 212–217

UDC 621.785.533

V. A. Simanovich,

M. N. Pishchov,

S. Ye. Belsky,

F. F. Tsaruk,

D. N. Skvortsov

DOI : https://doi.org/10.52065/2519-402X-2021-246-27-212--217

On the question of choosing the parameters of the technological equipment of skidders 218–223

UDC 630*377.4

V. S. Isachenkov,

S. Ye. Ariko,

V. A. Simanovich

DOI : https://doi.org/10.52065/2519-402X-2021-246-28-218-223

New technological solutions for standing skyline in waterlogged areas 224–235

UDC 630*377.21(252.6)

A. O. Shoshyn

DOI : https://doi.org/10.52065/2519-402X-2021-246-29-224-235

WOODWORKING INDUSTRY

Evaluation of the durability of water-dispersion lacquer VD AK11L when painting oak wood 236–241

UDC 678.4.023

T. I. Kopylova,

S. G. Guzii,

I. K. Bazhelka,

A. A. Kanavalava

DOI : https://doi.org/10.52065/2519-402X-2021-246-30-236-241

On the feasibility and prospects of using wooden sleepers in curvilinear sections 242–249

UDC 625.172:625.142.21

A. B. Neuzorava,

V. V. Romanenko

DOI : https://doi.org/10.52065/2519-402X-2021-246-31-242-249

Design development of lightweight sports and running plastick ski 250–259

UDC 685.363

A. V. Polkhovsky,

S. A. Prokhorchik,

S. V. Shet’ko,

E. V. Ruchkina

DOI : https://doi.org/10.52065/2519-402X-2021-246-32-250-259

Optimization of technological parametters thermo-chemical modification of soft deciduous wood rocks in order to obtain the maximum generalized criterion for assessing the quality of physical and mechanical properties 260–267

UDC 674.048.5

L. V. Ignatovich,

V. V. Tuleyko,

А. S. Chuikov,

S. S. Utgof

DOI : https://doi.org/10.52065/2519-402X-2021-246-33-260-267

Study of the parameters of the initial wood heating technology in an unsaturated environment 268–276

UDC 674.04.047.3

О. G. Rudak

DOI : https://doi.org/10.52065/2519-402X-2021-246-34-268-276

Research of the processes of heat and mass transfer during heating of wood in an unsaturated environment 277–283

UDC 674.04.047.3

О. G. Rudak

DOI : https://doi.org/10.52065/2519-402X-2021-246-35-277-283

Evaluation of the possibility of using the bark of trees growing in the Republic of Belarus for the granulation 284–289

UDC 674.812:674.836

I. G. Fedosenko

DOI : https://doi.org/10.52065/2519-402X-2021-246-36-284-289

Research of the durability of wood impregnated with water-soluble and oily products various conditions services 290–297

UDC 674.048

O. K. Leonovich,

N. A. Mazalo

DOI : https://doi.org/10.52065/2519-402X-2021-246-37-290-297

ALL-ENGINEERING QUESTIONS OF TIMBER PROCESSING COMPLEX

Impact analysis of the radioactive contamination of non-timber forest resources on the internal radiation of local people 298–305

UDC 614.876:630*8

G. A. Chernushevich,

N. O. Azovskaya,

A. V. Domnenkova,

S. V. Kiselev

DOI : https://doi.org/10.52065/2519-402X-2021-246-38-298-305

Applicability of the methods for the assessment of emergency risks at quarry lakes 306–312

UDC 628.39

V. Ye. Levkevich,

G. I. Kasperov,

U. V. Zyazyulya

DOI : https://doi.org/10.52065/2519-402X-2021-246-39-306-312

Improving fatigue characteristics of structural and tool steels by surface hardening 313–319

UDC 674.023

M. N. Pishchov,

S. Ye. Belsky,

Adel Abdel Wasset Rashid,

A. V. Vergeichik

DOI : https://doi.org/10.52065/2519-402X-2021-246-40-313-319

Design features of the circular saw for wood cutting 320–326

UDC 674.053

A. A. Grishkevich,

S. A. Grinevich,

G. V. Alifirovets

DOI : https://doi.org/10.52065/2519-402X-2021-246-41-320-326

Features of transformation of the cutting angle of the drilling tool depending on the position of its blade 327–332

UDC 674.055:621.95.04

T. A. Mashoripova,

А. A. Grishkevich

DOI : https://doi.org/10.52065/2519-402X-2021-246-42-327-332

Investigation of the influence of parameters of elastic elements of a new drilling tool design on the drilling depth of LDsTP 333–339

UDC 674.055:621.95

А. F. Anikeenko,

T. A. Mashoripova

DOI : https://doi.org/10.52065/2519-402X-2021-246-43-333-339

Mathematical model forecast change rounding radius cutting edge knife of chipper-canter machines 340–344

UDC 674.914:674.338

I. K. Klepatski,

V. V. Rapovets

DOI : https://doi.org/10.52065/2519-402X-2021-246-44-340-344

Siffness calculation of the claw curtains axes 345–349

UDC 674.055:621.93.023.2

S. A. Grinevich,

A. A. Grishkevich

DOI : https://doi.org/10.52065/2519-402X-2021-246-45-345-349

Study results definitions conditions for self-grounding of the wood cutting blade tool 350–355

UDC 674.05:621.923.6

A. A. Grishkevich,

D. L. Bolochko

DOI : https://doi.org/10.52065/2519-402X-2021-246-46-350-355