Volume 258

Entire issue: Proceedings of BSTU Issue 1 No.2 - Forestry. Environmental management. Reprocessing of renewable resources

FOREST MANAGEMENT, FOREST INVENTORY AND INFORNATION SYSTEMS IN FORESTRY

Measurements and accounting of harvested round wood: history and present 5–19

UDC 630*526:630*527

Minkevich Siarhei Ivanavich,

Demid Nikolay Petrovich,

Kotsan Vladimir Vasil’evich,

Sevruk Pavel Vladimirovich,

Balakir Mikhail Viktaravich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-5-19

Dependence of the radial growth of pine and spruce from changes in spatial structure complex stan 20–26

UDC 630*232

Sevko Oksana Aleksandrovna,

Kotsan Vladimir Vasil’yevich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-20-26

FOREST ECOLOGY AND SILVICULTURE

Geobatanical characteristics of pine phytocenoses on raised bogs of the Naliboksky Nature Reserve in conditions of degradation of drainage systems 27–36

UDC 630*385:574.4:502.4

Komar Artur Yur’yevich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-27-36

Dynamics of formation of pine forests (Pinetasilvestriae) of the Republic of Belarus 37–48

UDC 630*161.32:630*907.3

Rozhkov Leonid Nikolaevich,

Yeroshkina Irina Fedorovna,

Shatravko Valentin Gennadievich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-37-48

Natural successions in high-age silver birch forests (on the example of the Berezinsky Reserve) 49–54

UDC 581.1.03;574.5;572.1/.4

Starikova Liliya Ivanovna,

Yermokhin Maxim Valer’evich,

Ivkovich Valery Semenovich,

Zimnitski Vadim Antonovich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-49-54

Dynamics and productivity of oak forests in the absence of economic activities in the south-east of the Belarusian Polesye 55–66

UDC 630*52:630*228.8(630*176.322.6):630*11

Uglyanets Anatoliy Vladimirovich,

Garbaruk Dmitriy Konstantinovich,

Shumak Svetlana Vasilyevna

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-55-66

FOREST REGENERATION AND FOREST GROWING

The growth of the petiolate oak in height in forest crops Pripyatsky National Park 67–71

UDC 630*232.329.9

Bespalyy Andrey Aleksandrovich,

Sokolovskiy Ivan Vasilievich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-67-71

Dynamics of substrate humidity indicators depending on the dose of wetting agent 72–78

UDC 630*232

Nosnikov Vadim Valer’evich,

Yurenya Andrey Vladimirovich,

Selishcheva Oksana Aleksandrovna,

Granik Aleksandr Mikhaylovich;

Alam Michel

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-72-78

Changes in soil and ground conditions under the influence various types of woody vegetation pond UE “Minskvodokanal” 79–85

УДК 630*114.26

Yurenya Andrey Vladimirovich,

Yakimov Nikolay Ignat’yevich,

Selishcheva Oksana Aleksandrovna,

Granik Aleksandr Mikhaylovich,

Yurenya Elena Gennad’yevna

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-79-85

FOREST PROTECTION AND LANDSCAPING

The study of the phenological features of magnolias (Magnolia L.) in the conditions of Belarus 86–93

UDC 582.677(476)

Malevich Anna Mihaylovna,

Shpitalnaya Tamara Vasil’yevna

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-86-93

TOURISM AND FOREST HUNTING

Assessment of the attractiveness of educational and ecological trails resources 94–104

UDC 504.54:378:911.9

Andreeva Victoriya Leonidovna

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-94-104

To the question of using the potential of the Boulder Museum for the development of ecological tourism in urban areas 105–108

UDC 338.482

Bessarab Dmitry Aleksandrovich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-105-108

Features of the habitus of interspecific blueberry hybrids (Vaccinium corymbosum L. (Spartan, Duke) ♀ × Vaccinium angustifolium Ait. ♂), cultivated on developed riding peat bogs in Belarusian Lakeland 109–118

UDC 634.734/.737:631.527.5

Gordey Dmitriy Vasil’yevich,

Morozov Oleg Vcevolodovich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-109-118

Forest recreation as an economically attractive and independent type of forest use 119–124

UDC 630*627.3

Nikolai Tarasovich Yushkevich,

Kozorez Alexander Ivanovich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-119-124

TIMBER PROCESSING COMPLEX. TRANSPORT AND TECHNOLOGICAL QUESTIONS

Increasing the performance of wheeled machines due to regulation of air pressure in tires 125–129

UDC 621.3.027.542.3

Kim Yuriy Alekseevich,

Naskovets Mikhail Trofimovich,

Zharkov Nikolay Ivanovich,

Gil Vitaliy Ivanovish

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-125-129

Methods for assessing the impact of the placement of technological elements of the cutting area on the forwarder’s performance 130–136

UDC 630*356

Pankratovich Alexander Sergeevich,

Protas Pavel Alexandrovich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-130-136

WOODWORKING INDUSTRY

Analysis of complex quality assessments affecting the anatomical and orthopedic effects in the design upholstered furniture 137–147

UDC 684.73:658.562

Ignatovich Lyudmila Vladimirovna,

Gordiyevich Ekaterina Ivanovna

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-137-147

Features of the production of wooden cutting boards148–154

UDC 674.59

Haiduk Siarhei Siargeevich,

Prokhorchik Sergey Aleksandrovich,

Ruchkina Yelena Vasil’yevna

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-148-154

Disk hub performance tillage unit with modified wooden bearing 155–161

UDC 631.1

Nevzorova Alla Bronislavovna,

Saveliev Yuriy Vitalievich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-155-161

ALL-ENGINEERING QUESTIONS OF TIMBER PROCESSING COMPLEX

Elastic-plastic deformation of the claw curtains axes 162–166

UDC 674.055:621.93.023.2

Grinevich Sergey Anatol’yevich,

Grishkevich Aleksandr Aleksandrovich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-162-166

Results of experimental investigations effects of axis angle on milling power 167–172

UDC 539.422.5

Bolochko Dmitriy Leonidovich,

Grishkevich Aleksandr Aleksandrovich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-167-172

Influence of the loss of the cutting ability of the knife of the milling-cutter machine on the quality of the end cut of the element of technological chips 173–177

UDC 674.914:674.338

Klepatski Ihar Kazimiravich,

Rapovets Vyacheslav Valer’yevich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-173-177

Investigation of the power characteristics of the chipboard drilling process with spiral drills with various technological parameters 178–183

UDC 621.934

Mashoripova Tatiana Aleksandrovna,

Anikeenko Andrey Fedorovich

DOI: https://doi.org/10.52065/2519-402X-2022-258-2-178-183