Volume 283

Entire issue: Proceedings of BSTU Issue 2 No. 1 - Chemical engineering, biotechnologies, geoecology

CHEMICAL ENGINEERING. BIOTECHNOLOGIES

  

Influence of plasticizing components on technical properties of elastomer compositions based on general purpose rubbers 5-11

UDC 678.049

Krotova O. A.;

Shashok Zh. S.;

Uss E. P.;

Leshkevich A. V.;

Bogdanovich D. A.;

Zholnerkevich V. I.

DOI: https://doi.org/10.52065/2520-2669-2024-283-1.

Structure and properties of elastomer compounds with rosin-containing and nano-sized additives 12-19

UDC 678.046

Uss E. P.;

Prokopchuk N. R.;

Shashok Zh. S.;

Krotova O. A.;

Leshkevich A. V.;

Klyuev A. Yu.

DOI: https://doi.org/10.52065/2520-2669-2024-283-2.

Content analysis of the production of phytopreparations based on polysaccharides 20-28

UDC 615.322

Shakuro N. F.

DOI: https://doi.org/10.52065/2520-2669-2024-283-3.

Performance properties of elastomer compositions modified by gamma quantums 29-35

UDC 678.09

Bobrova V. V.;

Kasperovich A. V.;

Tochilin E. V.

DOI: https://doi.org/10.52065/2520-2669-2024-283-4.

Study of heat transfer in tubular-latting nozzles with a developed surface 36-42

UDC 665.6

Rakhmanova M. I.;

Frantskevich V. S.;

Nurmukhamedov H. S.;

Mavlanov E. T.;

Nishanova S. H.;

Lankin R. I.

DOI: https://doi.org/10.52065/2520-2669-2024-283-5.

Method for refined calculation of the heat transfer surface of a tubular device for heating hydrocarbon raw materials 43-49

UDC 665.6

Rakhimzhanova Sh. S.;

Hudayberdiyev A. A.;

Hakimova G. N.;

Frantskevich V. S.;

Lankin R. I.

DOI: https://doi.org/10.52065/2520-2669-2024-283-6.

Using mathematical models of turbulence to determine gas dynamic characteristics impact centrifugal mill 50-58

UDC 621.926.88

Fedarovich E. G.;

Levdanski A. E.;

Kovaleva A. A.;

Nurmukhamedov H. S.

DOI: https://doi.org/10.52065/2520-2669-2024-283-7.

Investigation of the influence of dispersed fillers with increased thermal conductivity on the properties of thermoplastic polymers 59-64

UDC 678.046.3

Kasperovich V. M.;

Kasperovich A. V.; 

Petrushenya A. F.; 

Liubimau A. G.; 

Lenartovich L. A.; 

Lenartovich L. A.

DOI: https://doi.org/10.52065/2520-2669-2024-283-8.

Effect of metal oxide nanoparticles on polymer material properties (review) 65-76

UDC 678.7-036

Lenartovich L. A.;

Prokopchuk N. R.;

Kasperovich V. M.;

Petrushenya A. F.;

Liubimau A. G.

DOI: https://doi.org/10.52065/2520-2669-2024-283-9.

Complex processing of flax with the production of innovative products (review) 77-91

UDC 633.521-027.31

Zakharchuk D. D.;

Boltovsky V. S.

DOI: https://doi.org/10.52065/2520-2669-2024-283-10.

Investigation of thermal stability of raw materials components and NPK fertilizers based on them 92-97

UDC 661.152.3

Nosko E. V.;

Eschenko L. S.

DOI: https://doi.org/10.52065/2520-2669-2024-283-11.

Reducing the caking of sodium metasilicates with variable degrees of hydration 98-105

UDC 691.57

Lukash E. V.;

Kuzmenkov M. I.;

Shalukho N. M.;

Kuzmenkov D. M.;

Yatsenko E. A.

DOI: https://doi.org/10.52065/2520-2669-2024-283-12.

Implication of phosphate source types on distribution of primes in the system CaSO4 – H3PO4 – H2O in orthophosphoric acid production 106-114

UDC 661.634.22:661.8’045.4/.5

Dormeshkin O. B.;

Hauryliuk A. N.;

Mokhart M. S.;

Byshyk A. A.

DOI: https://doi.org/10.52065/2520-2669-2024-283-13.

Moldex3D system for injection molding analysis in mold design 115-121

UDC 004.942

Kandyba D. A.;

Liubimau A. G.;

Petrushenya A. F.;

Kasperovich O. M.;

Lenartovich L. A.

DOI: https://doi.org/10.52065/2520-2669-2024-283-14.

Metastructures based on polymer composite materials and their properties in the microwave range (review) 122-135

UDC 678.8

Markovsky A. S.;

Liubimau A. G.;

Petrushenya A. F.;

Kasperovich O. M.;

Lenartovich L. A.

DOI: https://doi.org/10.52065/2520-2669-2024-283-15.

The quality of paper and cardboard depends on the methods of stabilization of dispersed phase particles in the developed neutral and highly resin modified rosin products 136-149

UDC 676.2.014.44

Dashkevich S. A.;

Gordeyko S. A.;

Chernaya N. V.;

Shashok Zh. S.;

Nikulin S. S.

DOI: https://doi.org/10.52065/2520-2669-2024-283-16.

The influence of methods of application of weakly basic cationic polyelectrolytes on the quality of glued types of paper and cardboard and retention of paper pulp components 150-160

UDC 676.2:544.6.018.47-036.5

Dashkevich S. A.;

Gordeyko S. A.;

Shashok Zh. S.;

Uss E. P.;

Nikulina N. S.

DOI: https://doi.org/10.52065/2520-2669-2024-283-17.

The influence of cultivation conditions on the morphological characteristics of filamentous forms of bacteria isolated from biocenoses of wastewater treatment plants 161-166

UDC 628.355.5

Masekhnovich A. A.;

Grebenchikova I. A.;

Markevich R. M.;

Rymovskaya M. V.

DOI: https://doi.org/10.52065/2520-2669-2024-283-18.

Characteristics of filamentous forms of microorganisms isolated from the biocenosis of activated sludge from wastewater treatment plants 167-175

UDC 628.355.5

Masekhnovich A. A.;

Grebenchikova I. A.;

Markevich R. M.;

Rymovskaya M. V.

DOI: https://doi.org/10.52065/2520-2669-2024-283-19.

Experimental study of the effect of acetone vapors on the quality of the side surface of the printed products 176-183

UDC 678.745.32:004.925:661.727.4

Kordikova E. I.;

Dyakova H. N.;

Khodzer V. B.;

Smeyan V. E.

DOI: https://doi.org/10.52065/2520-2669-2024-283-20.

The market of materials for vat photopolymerization technologies (review) 184-193

UDC 655.225.6:773.92:004.925.84:542.952.6:339.13

Khodzer V. B.;

Kordikova E. I.;

Dyakova H. N.

DOI: https://doi.org/10.52065/2520-2669-2024-283-21.

GEOECOLOGY

  

Accumulation of industrial waste and their influence on the condition of groundwater in the Republic of Belarus 194-200

UDC 556.388:661.632.2

Neuzorava A. B.;

Shershnyov O. V.

DOI: https://doi.org/10.52065/2520-2669-2024-283-22.