Volume 241
Entire issue: Proceedings of BSTU Issue 2 No. 1 - Chemical engineering, biotechnologies, geoecology
CHEMICAL ENGINEERING, BIOTECHNOLOGIES |
|
Phytotea: composition, properties, production (review) 5-23 UDC 663.969+663.954 |
|
Potentiometric titration of zinc salts 24-29 UDC 546.05;661.8 |
|
Fluffy sphagnum peat as a raw material for the production of humic biologically active preparations used in animal husbandry 30-34 UDC 636.087.7 |
|
Study of hydroxocomplexes formation in Fe3+ – Co2+ – NO3– – H2О system 35-39 UDC 546.62:546.492:546.732 A. E. Sokolovsky |
|
Production method microcrystalline cellulose (review) 40-50 UDC 630*863 V. S. Boltovskiy |
|
New solvent for low temperature deparaffinization of oil raffinates 51-56 UDC 665.6 |
|
Influence of heavy pyrolysis resin on the process of oil tar oxidation 57-62 UDC 665.65 |
|
Biosorption, biocoagulation properties of active sludge and waste waters toxicity changing during their biological treatment 63-68 UDC 630*863 |
|
Technical and economic comparison and selection of the optimal nozzle 69-73 UDC 66.021.3 |
|
NMR analysis of thermal reactions of resin acid of rosin 74-81 UDC 543.429.23:66.092-977:665.947.2 |
|
Influence of technological parameters of vulcanization on the properties of tire rubbers 82-87 UDC 678.028.2 |
|
Elastic and strength properties of rubbers based on BNKS-18 with carbon nanostructural materials and low-active technical carbon 88-94 UDC 678.046 |
|
The influence of fibrous fillers on the properties of tire elastomer compositions 95-100 UDC 678.046.52 |
|
The effect of stabilizing additives on the operational properties of elastomeric compositions 101-107 UDC 678.046:547.565.2 |
|
Heat exchange and hydrodynamics in the jet circulation contact heater 108-113 UDC 621.1.016 |
|
Modification with nano-diamond particles of water-dispersive primers and enamels 114-119 UDC 678.06 |
|
Influence of pigment materials composition on decorative, physical and mechanical properties of silicate brick 120-125 UDC 546.723+546.742+531.212;691.316 |
|
Research of physical and chemical transformations occurring in the volume of granules of integrated mineral fertilizers in the storage process 126-138 UDC 661.152.3 |
|
Obtaining, studying properties and development technologies for precision casting models using the modified rosin 139-146 UDC 676.085.4 A. Yu. Klyuev |
|
Obtaining and research of physico-chemical properties terpenomaline resins from resin, extractive and sulfate skipidars in the presence of catalysts 147-152 UDC 676.085.4 |
|
Development and research of properties flushing compounds obtained using secondary terpenoid products 153-162 UDC 630*866:668.472.002.611/.612 |
|
Study of structure and physical and chemical properties oxidized resin acids depending on from the conditions on the process of thermal oxidation of rosin 163-171 UDC 676.262.014 |
|
Influence of rubber crush on the properties of oil bitumen 172-175 UDC 678.05 |
|
Mechanical properties and durability of epoxy coatings on copper 176-181 UDC 667.6 |
|
Physical and mechanical properties of two-component polyurethane paint materials 182-185 UDC 667.64 |
|
Retrospective of development of liquid crystal and anisotropic materials chemistry in Belarus 186-196 UDC 544.25 V. S. Bezborodov |
|
GEOECOLOGY |
|
Criteria for stable and efficient operation of pumping equipment with a frequency control drive 197-204 UDC 628.3(0.75.8) |
|
Biochemical technologies of artesian water treatment for industrial water supply needs 205-210 UDC 628.162 |
|
Determination of the influence of the uncertainty of greenhouse gas emissions in the “Energy” sector on the overall assessment of the uncertainty of the greenhouse gas inventory emissions and removals in the Republic of Belarus 211-227 UDC 544.25 |