APPLICATION OF COMPUTER-AIDED DESIGN SYSTEMS TO ASSESS THE INTERACTION OF PNEUMATIC TIRES WITH FOREST SOILS

UDC 004.942:630*31

  • Misuno Yuliya Igorevna − assistant, the Department of Logging Machinery, Forest Roads and Timber Production Technology. Belarusian State Technological University (13a, Sverdlova str., 220006, Minsk, Republic of Belarus). E-mail: julia.misuno@belstu.by

  • Protas Pavel Aleksandrovich − PhD (Engineering), Associate Professor, Assistant Professor, the Department of Logging Machinery, Forest Roads and Timber Production Technology. Belarusian State Technological University (13a, Sverdlova str., 220006, Minsk, Republic of Belarus). E-mail: protas@belstu.by

  • Moskalchuk Leonid Nikolaevich − DSс (Engineering), PhD (Agricultural), Associate Professor, Professor, the Department of Forestry. Belarusian State Technological University (13a, Sverdlova str., 220006, Minsk, Republic of Belarus). E-mail: lnm@belstu.by

DOI: https://doi.org/10.52065/2519-402X-2023-264-12

Keywords: CAD, modeling, engineering analysis, finite element method, pneumatic tires, forest soil, deformable base.

For citation: Misuno Yu. I., Protas P. A., Moskalchuk L. N. Application of computer-aided design systems to assess the interaction of pneumatic tires with forest soils. Proceedings of BSTU, issue 1, Forestry. Nature Management. Processing of Renewable Resources, 2023, no. 1 (264), pp. 111–120. DOI: https://doi.org/10.52065/2519-402X-2023-264-12 (In Russian).

Abstract

The solution of the problem of assessing the interaction of various types of logging machine propellers with soils has been further developed using information technologies that form new methods and ways of conducting scientific research in this area. In recent years, the use of computer-aided design (CAD) systems has found wide application as a more efficient and fairly accurate tool for studying complex processes of rolling a deformable wheel mover on a deformable support base. In this case, the key method for determining the main characteristics of the studied interaction process is the finite element method (FEM).

This paper discusses the issues of using CAD for scientific research and computational experiment in studying the process of interaction of pneumatic tires mounted on wheeled movers of logging machines with soils. An analysis of the applied CAD systems and products, their technical capabilities for performing the stages of modeling and engineering calculations was given. To solve the problem of determining the parameters of the interaction of a pneumatic wheel with forest soil, the paper describes the features, necessary conditions and initial data, taking into account the selected software, the characteristics of the objects under study, the simulated conditions for their interaction and the parameters to be determined.

The article gives a conclusion about the role of a computational experiment in CAD in the general methodology of research work, as well as the feasibility of using this tool in conjunction with the theoretical and experimental stages of research.

Download

References

  1. Boldovskiy V. N. Investigation of the processes of interaction of running systems of cars with a deformable supporting surface. Vostochno-evropeyskiy zhurnal peredovykh tekhnologiy [Eastern European Journal of Advanced Technology], 2012, no. 5/4, pp. 50–52 (In Russian).
  2. Fokin V. G. Metod konechnykh elementov v mekhanike deformiruyemogo tvyordogo tela [Finite element method in solid mechanics]. Samara, Samara State Technical University Publ., 2010. 131 p. (In Russian).
  3. Shirvel’ P. I. Osnovy metoda konechnykh elementov v mekhatronike: v 2 chastyakh. Chast’ 1 [Fundamentals of the finite element method in mechatronics: in 2 parts. Part 1]. Minsk, BNTU Publ., 2015. 89 p. (In Russian).
  4. Teslenko D. S., Belyakov V. V., Makarov V. S., Zezyulin D. V. Using the Finite Element Method to Solve Terramechanics Problems. Trudy Nizhegorodskogo gosudarstvennogo tekhnicheskogo universiteta imeni R. E. Alekseeva [Proceedings of the R. E. Alekseev Nizhny Novgorod State Technical University], 2014, no. 5, pp. 52–58 (In Russian).
  5. Bekakos C. A., Papazafeiropoulos G., O’Boy D. J., Prins J. Pneumatic tyres interacting with deformable terrains. Journal of Physics: Conference Series, 2016, vol. 744, no. 1, pp. 1–12. DOI: 10.1088/1742-6596/744/1/012213.
  6. Bekakos C. A., Papazafeiropoulos G., O’Boy D. J., Prins J. Development of accurate pneumatic tyre finite element models based on an optimization procedure. VII European Congress on Computational Methods in Applied Sciences and Engineering, Crete, 2016, vol. 1, pp. 8262–8274.
  7. Bekakos C. A., Papazafeiropoulos G. Finite element modeling of a pneumatic tyre interacting with rigid road and deformable terrain. International Journal of Vehicle Performance, 2017, vol. 3, no. 2, pp. 142–166.
  8. Biris S.-St., Ungureanu N., Maican E., Murad E., Vladut V. FEM model to study the influence of tire pressure on agricultural tractor wheel deformations. Engineering for Rural Development: proceedings of the 10th International Scientific Conference. Jelgava, Latvia, 2011, ref. 9, pp. 223–228.
  9. Ungureanu N., Vlăduț V., Biriș S.-Șt. FEM modelling of soil behavior under compressive loads. IOP Conference Series: Materials Science and Engineering, 2017, vol. 163, pp. 1–10. DOI: 10.1088/1757-899X/163/1/012001.
  10. Misuno Yu. I., Protas P. A. Features of the design of forest machine tires and ways to improve them. Tekhnologiya i tekhnika lesnoy promyshlennosti: tezisy dokladov 82-y nauchno-tekhnicheskoy konferentsii professorsko-prepodavatel'skogo sostava, nauchnykh sotrudnikov i aspirantov [Technique and technology of the forest industry: abstracts of the 82nd scientific and technical conference of faculty, researchers and graduate students]. Minsk, 2018, pp. 27–28 (In Russian).
  11. Beskhlebnikov I. V. Classification of CAD and their functional purpose. Mezhdunarodnyy studencheskiy nauchnyy vestnik [International Student Science Bulletin], 2019, no. 6. Available at: https://s.eduherald.ru/pdf/2019/6/19836.pdf (accessed 15.10.2022) (In Russian).
  12. General information about CAD. Classification and composition of CAD. Available at: http://infoteh.h1n.ru/gallery/sl2.pdf (accessed 20.09.2022) (In Russian).
  13. Shimanovskiy A. O., Putyato A. V. Primeneniye metoda konechnykh elementov v reshenii zadach prikladnoy mekhaniki [Application of the finite element method in solving problems of applied mechanics]. Gomel, BelGUT Publ., 2008. 61 p. (In Russian).
  14. Unyanin A. N., Evstigneev A. D. Modelirovaniye i inzhenernyy analiz s pomoshch’yu programmnogo kompleksa NX [Modeling and Engineering Analysis with NX Software]. Ulyanovsk, UlGU Publ., 2017. 212 p. (In Russian).
  15. Ryzhov S. A., Il’in K. A., Varyuhin A. N. Tire design using the ABAQUS software package. SAPR i grafika [CAD and graphics], 2006, no. 1. Available at: https://sapr.ru/article/ (accessed 05.10.2022) (In Russian).
  16. Sachenkov O. A., Sachenkov A. A., Bol’shakov P. V., Gerasimov O. V. Avtomatizirovannoye modelirovaniye i raschyot konstruktsiy v ANSYS: odnomernyye modeli [Automated Modeling and Structural Analysis in ANSYS: 1D Models]. Kazan, Kazanskiy University Publ., 2019. 140 p. (In Russian).
  17. Ivanov D. V., Dol’ A. V. Vvedeniye v Ansys Workbench [Introduction to Ansys Workbench]. Saratov, Amirit Publ., 2016. 56 p. (In Russian).
  18. Protas P. A., Misuno Yu. I. Investigation of pressure of the forwarder “AMKODOR 2661-01” wheeler on the base surface. Trudy BGTU [Proceedings of BSTU], issue 1, Forestry. Nature Management. Processing of Renewable Resources, 2017, no. 2, pp. 251–258 (In Russian).
  19. Kasperovich A. V., Shashok Zh. S., Mozgalev V. V. Tekhnologiya proizvodstva shin [Tire production technology]. Minsk, BSTU Publ., 2011. 147 p. (In Russian).
  20. Yakovlev M. Ya. Modelirovaniye effektivnykh mekhanicheskikh kharakteristik rezinokorda pri konechnykh deformatsiyakh. Dissertatsiya kandidata fiziko-matematicheskih nauk [Modeling the effective mechanical characteristics of the rubber cord at finite deformations. Dissertation PhD (Physics and Mathematics)]. Moscow, 2014. 126 p. (In Russian).
  21. Hot’ko A. V., Shil’ko S. V. Application of the theory of mesh shells in the design of diagonal car tires. Mekhanika mashin, mekhanizmov i materialov [Mechanics of machines, mechanisms and materials], 2020, no. 1 (50), pp. 5–11 (In Russian).
  22. Baranowski P., Bogusz P., Gotowicki P., Małachowski J. Assessment of Mechanical Properties of Offroad Vehicle Tire: Coupons Testing and FE Model Development. Acta Mechanica et Automatica, 2012, no. 2, pp. 17–22.
  23. Misuno Yu. I., Protas P. A. Solving the problem of determining the impact of the mover on the soil, taking into account rheological factors. Lesnaya inzheneriya, materialovedeniye i dizayn: materialy dokladov 85-y nauchno-tekhnicheskoy konferentsii [Forest engineering, materials science and design: proceedings of the 85th scientific and technical conference]. Minsk, 2021, pp. 46–47 (In Russian).
15.10.2022