ANALYSIS OF THE EFFECTIVENESS OF THE USE OF VARIOUS BASE CHASSIS DEPENDING ON THE PLACE OF INSTALLATION OF TECHNOLOGICAL EQUIPMENT FOR COLLECTING LOGGING WASTE

UDC 630*364:629.3.023.1

  • Kononovich Denis Aleksandrovich – Assistant Lecturer, the Department of Logging Machinery, Forest Roads and Timber Production Technology. Belarusian State Technological University (13a, Sverdlova str., 220006, Minsk, Republic of Belarus). E-mail: denkon_92@mail.ru

  • Golyakevich Sergey Aleksandrovich – PhD (Engineering), Assistant Professor, the Department of Logging Machinery, Forest Roads and Timber Production Technology. Belarusian State Technological University (13a, Sverdlova str., 220006, Minsk, Republic of Belarus). E-mail: gsa@belstu.by

  • Ariko Sergey Yevgen’evich – PhD (Engineering), Assistant Professor, the Department of Logging Machinery, Forest Roads and Timber Production Technology. Belarusian State Technological University (13a, Sverdlova str., 220006, Minsk, Republic of Belarus). E-mail: sergeyariko@mail.ru

  • Mokhov Sergey Petrovich – PhD (Engineering), Associate Professor, Head of the Department of Logging Machinery, Forest Roads and Timber Production Technology. Belarusian State Technological University (13a, Sverdlova str., 220006, Minsk, Republic of Belarus). E-mail: lmitlz@belstu.by

DOI: https://doi.org/10.52065/2519-402X-2022-252-1-105-112

Key words: efficiency, basic chassis, logging waste, technological equipment.

For citation: Kononovich D. A., Golyakevich S. A., Ariko S. Ye., Mokhov S. P. Analysis of the effectiveness of the use of various base chassis depending on the place of installation of technological equipment for collecting logging waste. Proceedings of BSTU, issue 1, Forestry. Nature Management. Proccessing of Renewable Resources, 2021, no. 1 (252), pp. 105–112 (In Russian). DOI: https://doi.org/10.52065/2519-402X-2022-252-1-105-112.

Abstract

The article presents the comparative efficiency of the base chassis operation and the choice of the location for the installation of technological equipment for collecting logging waste. A comparative assessment of the operational efficiency was carried out on the basis of the specific energy potential of the capacities. Evaluation of the operating efficiency of the base chassis was carried out during the operation of various types of soils in accordance with their gear ratio of the transmission, depending on the choice of gears and options for installing technological equipment for collecting logging waste. The options for the layout of the base chassis and technological equipment when dragging a pack of logging waste are considered, depending on the volume, taking into account the work on types of soil when working with a reduction gear or without it. The main criteria affecting the increase in the operational efficiency of the base chassis with technological equipment, depending on the type of soil, have been determined. The analysis of the efficiency of operation of machines for collecting felling waste when performing technological operations with a change in speed modes of operation, depending on the base chassis, type of soil, work with or without a reduction gear, the place of installation of technological equipment, has been carried out.

Download

References

  1. Zhukov A. V. Teoriya lesnykh mashin [The theory of forest machines]. Minsk, BGTU Publ., 2001. 640 p. (In Russian).
  2. Golyakevich S. A., Goronovskiy A. R. Method estimation specifications forwarders on the design stage. Trudy BGTU [Proceedings of BSTU], 2016, no. 2: Forest and Woodworking Industry, pp. 15–19 (In Russian).
  3. Isachenkov V. S., Simanovich V. A. Substantiation of the parameters of tow technology equipment wheeled skidders. Trudy BGTU [Proceedings of BSTU], 2016, no. 2: Forest and Woodworking Industry, pp. 23–27 (In Russian).
  4. Kononovich D. A., Mokhov S. P., Simanovich V. A., Ariko S. Ye. Analysis of structural features of machines for collection forest residues. Trudy BGTU [Proceedings of BSTU], 2016, no. 2: Forest and Woodworking Industry, pp. 31–35 (In Russian).
  5. Golyakevich S. A., Goronovskiy A. R. Integrated technical assessment of the consumer qualities of forest machines. Trudy BGTU [Proceedings of BSTU], 2015, no. 2: Forest and Woodworking Industry, pp. 67–70 (In Russian).
  6. Loy V. N., Germanovich A. O. Modeling the work of a self-propelled chipper with an autonomous engine. Trudy BGTU [Proceedings of BSTU], 2013, no. 2: Forest and Woodworking Industry, pp. 18–21 (In Russian).
  7. Golyakevich S. A. Modeling the work of a self-propelled chipper with an autonomous engine. Trudy BGTU [Proceedings of BSTU], 2013, no. 2: Forest and Woodworking Industry, pp. 72–78 (In Russian).
  8. Ariko S. Ye. The mathematical model of the harvester 4W4. Trudy BGTU [Proceedings of BSTU], series II, Forest and Woodworking Industry, 2010, issue XVIII, pp. 113–117 (In Russian).
  9. Simanovich V. A. Evaluation of the dynamic loading of wheeled forest machines at operational operating modes. Trudy BGTU [Proceedings of BSTU], series II, Forest and Woodworking Industry, 2010, issue XVIII, pp. 122–125 (In Russian).
  10. Golyakevich S. A. Application of adaptive control systems to increase the realization of energy potential of harvesters. Trudy BGTU [Proceedings of BSTU], issue 1, Forestry, Nature Management and Renewable Resources Processing, 2017, no. 2, pp. 238–244 (In Russian).
  11. Golyakevich S. A., Goronovskiy A. R. The load bearing structure of the harvester during technological operations. Trudy BGTU [Proceedings of BSTU], 2011, no. 2: Forest and Woodworking Industry, pp. 27–30 (In Russian).
  12. Simanovich V. A., Pishchov M. N., Smeyan A. I. Features of operational modes of loading of forest modular machines. Trudy BGTU [Proceedings of BSTU], series 2, Forest and Woodworking Industry, 2007, issue XV, pp. 77–78 (In Russian).
  13. Simanovich V. A., Isachenkov V. S., Bobrovich V. A. Evaluation of the dynamic loading of the skidding system “wheeled tractor – a pack of trees”. Trudy BGTU [Proceedings of BSTU], series 2, Forest and Woodworking Industry, 2007, issue XV pp. 74–76 (In Russian).
  14. Pishchov S. N. Mathematical model of oscillations of a forwarder 6W6 of increased carrying capacity. Trudy BGTU [Proceedings of BSTU], series 2, Forest and Woodworking Industry, 2007, issue XV, pp. 52–55 (In Russian).
  15. Isachenkov V. S., Simanovich V. A. Mathematical model of a skidder. Trudy BGTU [Proceedings of BSTU], 2011, no. 2: Forest and Woodworking Industry, pp. 75–81 (In Russian).
15.10.2021