Volume 175
Entire issue: Proceedings of BSTU No. 2 - Forest and woodworking industry
|
TIMBER PROCESSING COMPLEX. TRANSPORT AND TECHNOLOGICAL QUESTIONS |
|
|
|
Evaluation of vibration load of operator’s workplace of the mobile chipper 3–7 UDC 630*363.7 |
|
|
Forest engineering development strategy in the Republic of Belarus 8–10 UDC 630*36 |
|
|
Analysis of the structural and technological features mobile of the mobile cable skidding systems for flat conditions 11–15 UDC 630*372 |
|
|
Construction of nonrigid road pavement of forest roads with the required strength reliability 16–18 UDC 625.089.42 |
|
|
Features estimation of dynamic loading of forwarders 8K8 undercarriage 19–22 UDC 630*377.44 |
|
|
Model of forwarder work in terms of reliability 23–26 UDC 634.0.30 |
|
|
Statistical estimation method of the soil freezing depth 27–31 UDC 625 |
|
|
Timber processing system and main lines of development 31–35 UDC 625.711.84 |
|
|
Substantiation of the structure and composition of road soil-cement mixture on the basis of mathematical model 39–43 UDC 630*383.4 |
|
|
Constraction improvement of road pavement of forest roads 44–49 UDC 630*383.4 |
|
|
Organizational and technical support of production units engaged in the harvest areas removing from the wind-fallen forest 50–54 UDC 630*2:502.174 Fedorenchik Alexandr Semenovich, |
|
|
Features of the development of remote forest fund with consideration for conformity of the technologies and systems of machines to principles of forest certification 55–58 UDC 625.711.84 |
|
|
Special aspects of structural implementation of technological equipment of timber loading and transporting machines 56–62 UDC 630*36./37 Kononovich Denis Aleksandrovich, |
|
|
Testing of forwarder 4WD with increased load capacity 63–66 UDC 630*36 Simanovich Vasiliy Antonovich, Asmolovskiy Mikhail Korneevich, |
|
|
Integrated technical assessment of the consumer qualities of forest machines 67–70 UDC 630*36.001.6 |
|
|
Examination of stress strain state and modernization of the bearing structure of forwarder Amkodor-2662 71–75 UDC 630*36.001.6 |
|
|
Forest resourses of the Republic of Belarus and its utilization 76–78 UDC 634.0.30 |
|
|
The type choice of trailer technological equipment of skidders 79–83 UDC 630*377.4 |
|
|
Fuel efficiency of wheeled skidder with different structure of technological equipment 84–88 UDC 630*377.4 Simanovich Vasiliy Antonovich, |
|
|
The actualization tasks of territorial potential of cutting fund in the Republic of Belarus 89–93 UDC 630*614 |
|
|
Rolling stock and roads for wood removals. Bases on intraction 94-98 UDC 630*383+630*37 |
|
WOODWORKING INDUSTRY |
|
|
|
Calculating the number of filings with the sawing edging boards 99–114 UDC 674.093 |
|
|
Evolution of human habitat and it’s connection to furniture 115–118 UDC 674.04 |
|
|
Wood modification by phenolic resin with reduction as the temperature and the heat treatment time 119–124 UDC 674.048.5 |
|
|
Design and technological features of manufacturing multilayer parquet products from veneer 125–129 UDC 674.048 |
|
|
Optimization of alder and birch wood thermomechanical modification technological modes for production of multilayer parquet products face layer 130–136 UDC 674.812–41:674.213(043.3) |
|
|
Qulitative indicators assessment of wooden skis protective and decorative coatings 137–141 UDC 667.64 |
|
|
Determining quality assessment of the wood penetration depth of protective agents 142–145 UDC 674.048.5 |
|
|
Mathematical model of the lightweight board with paper honeycomb core working for a bend 146–151 UDC 625.731 |
|
|
Abiotic and biological factors which result in wood deterioration during service 152–157 UDC 674.048.3 Trut’ko Victoriya Vladimirovna, |
|
|
Improving of the biological resistance of wood without chemical protection 158–161 UDC 674.04.047.3 |
|
|
Correction of a compounding of protective equipment in the course of wood impregnation 162–166 UDC 674.048 |
|
|
Plasticizing low grade wood species for parquet blocks 167–169 UDC 674.213.049.2:674.031 |
|
|
Effects of temperature and moisture effects on strength performance adhesive joints 170–173 UDC 674-419.32 |
|
|
Determination of protection factor of paint composition with specific properties by method of assessing results of digital radiography 174–179 UDC 674.419 |
|
|
Ways of improvement of physicomechanical indicators cement cement-bonded composites 180–186 UDC 691-431 |
|
|
Influence of moisture transfer on durability cement стружечных composites 187–190 UDC 691-431 |
|
|
Regimes and quality of lumber drying in the drying chambers produced by different manufacturers 157–160 UDC 674.04.047.3 |
|
|
Hygroscopicity of wood at the molecular level and justification shf-radiation for its dry 196–201 UDC 621.3.029.6:674.8 Vrublevskaya Valentina Ivanovna, Matusevich Vyacheslav Olegovich, |
|
ALL-ENGINEERING QUESTIONS OF TIMBER PROCESSING COMPLEX |
|
|
|
Radiological monitoring of fuel wood to be used at power plants (case of JSC “Ivatsevichdrev”) 202–205 UDC 539.16:662.71 Peretrukhin Viktor Vasil'evich, |
|
|
Hygienic assessment of microclimate influence on working conditions at chipboard manufacturing 206–209 UDC 613.646:674.815 |
|
|
Determination of stress from cutting forces in a narrow band saw 210–214 UDC 674.023 |
|
|
Estimate of construction efficiency of wood-milling cutters with open saw gullets 215–218 UDC 669.056.9:620 |
|
|
Manufacturing technology optimization of energy saving wood-milling cutters 219–223 UDC 669.056.9:620.1.(047.31) Karpovich Natal’ya Vladimirovna, |
|
|
Hardening of carbide wood-cutting tools by vacuum plasma deposition of nanocomposite coatings based on TiN 224–228 UDC 674.055:621.934(043.3) Latushkina Svetlana Dmitriyevna, |
|
|
Aluminum composite reinforced by quasicrystal particle Al–Cu–Fe 229–233 UDC 620.22-419.8-034.71 Volochko Aleksandr Tihonovich, |
|
|
Advanced technological unit of forest-transportation machines 234-237 UDC 630*36.001.6 |
|
|
Aspiration device for milling groups of woodworking machines with numerical program control 238–242 UDC 674.055 |
|
|
Design features modular spiral drills for through drilling of plate materials 243–246 UDC 674.025: 6.74.815 |
|
|
Cutting instrument state control during processing of wood and timber-base materials 247–249 UDC 674.055:621.914.2 Kravchenko Anatoliy Sergeevich, |
|
|
Results of laboratory tests of the reflex milling tool during the laminated boards processing 250–253 UDC 630*652.54 |
|
|
Influence of combined galvanic and PVD treatment on wear of steel knives edges of wood-cutting tool 254–257 UDC 674.055:621.934(043.3) |
|
|
The research of blunting of double-blade cutter of chipper machines and its impact on tangential cutting force 258–262 UDC 674.055:621.914.3 Grinevich Sergey Anatol’yevich, Rapovets Vyacheslav Valer’yevich, |
|
|
The technological bases of operation of a variable angle edge 263–266 UDC 674.055:621.914.2 |
|
|
Research results of influence of the wood grinding modes on quality of the surface being processed 267–270 UDC 674:621.922.024 |
|
|
Cutting products removal mode from the sanding belt surface during its work 271–274 UDC 674:621.922.024 |
|
|
Maximum lifetime determination of carbide circular saws at the laminated chipboard processing 275–279 UDC 674.053:621.934 |
|
|
The development of import-substituting technologies of chipping knives production and conducting of their large-scale tests 280–284 UDC 621.9; 621.715.2 |
|
|
Sludge depositories technical state as the main factor of their safety 285–289 UDC [712.5(282.3):627.8.059.22]:[519.2:311] Pastukhov Sergei Mikhailovich, |
